H0f vs. H0n2 |
Post Reply |
Author | |
Roger
Fremo og MjF medlem Joined: 02 november 2004 Location: Norway Status: Offline Points: 1620 |
Post Options
Thanks(0)
Posted: 27 desember 2004 at 20:52 |
Hei! Jeg trodde at H0f (noen ganger også omtalt som H0i) var det samme som H0n2; Smalspor i 1:87 med 6.5mm sporvidde. Men så sjekket jeg bestillingsskjemaet til en internettbutikk som kunne levere modellene sine i H0e, H0f og H0n2. Da stiller jeg meg spørsmålet; Hva er forskjell på H0f og H0n2? -Jeg trodde det var samme skala og sporvidde, jeg... |
|
Med vennlig hilsen
RGER “Det finnes ett forbilde for alt” |
|
Morten M
Veteran Joined: 02 november 2004 Location: Norway Status: Offline Points: 274 |
Post Options
Thanks(0)
|
Typisk eksempel på keiserens nye klær - dersom man ikke er ekstremt nøyeregnende?
M |
|
greffern
Medlem i MJF Joined: 03 november 2004 Location: Norway Status: Offline Points: 172 |
Post Options
Thanks(0)
|
H0f (feldbahn) er 600mm smalspor i H0 med Z skala sporvidde. H0n2 er vel da to fots sporvidde og i virkeligheten bare noen få centimeters forskjell i forhold til 600mm..... Hmm............ Dette må være noe for selvbyggere! |
|
Små irriterende bokstaver betyr bare en ting:
MVH Jon Oskar Grefsrud [http://www.norskmjforum.no/video/data/jog-logo.jpg"> |
|
Håvard H
Medlem i MJF Joined: 02 november 2004 Location: Norway Status: Offline Points: 2016 |
Post Options
Thanks(0)
|
En fot varierer vel endel med tid og sted. Jeg fleiper ikke nå, mener det bokstavelig! Eksempler klippet fra nett: En svensk fot = 296,9 mm. Samma som den gamla romerska foten. Sedan 1600-talet allmän i hela Sverige. 1 amerikansk fot= 304,8 mm Benytter man den svenske foten blir det altså en differanse på 6,2mm! Med den amerikanske snakker vi hele 9,6mm! Selv for en nagleteller som meg er dette en ignorerbar forskjell. Til slutt en munfull for de virkelig interesserte: -- The natural foot (pes naturalis in Latin), an ancient unit based on the length of actual feet, is about 25cm (9.8 inches). This unit was replaced in early civilisations of the Middle East by a longer foot, roughly 30cm or the size of the modern unit, because this longer length was conveniently expressed in terms of other natural units: 1 foot = 3 hands = 4 palms = 12 inches (thumb widths) = 16 digits (finger widths). The unit was used in both Greece and Rome; the Greek foot is estimated at 30.8cm (12.1 inches) and the Roman foot at 29.6cm (11.7 inches). In northern Europe, however, there was a competing unit known in Latin as the pes manualis or manual foot. This unit was equal to 2 shaftments, and it was measured "by hand", grasping a rod with both hands, thumbs extended and touching. The manual foot is estimated at 33.3cm (13.1 inches). In England, the Roman foot was replaced after the fall of Rome by the natural foot and the Saxon shaftment (16.5cm). The modern foot (1/3 yard or about 30.5cm) did not appear until after the Norman conquest of 1066. It may be an innovation of Henry I, who reigned from 1100 to 1135. Later in the 1100s a foot of modern length, the "foot of St. Paul"s" was inscribed on the base of a column of St. Paul"s Church in London, so that everyone could see the length of this new foot. From 1300 at least, to the present day there appears be little or no change in the length of the foot. In the latter years of the nineteenth century, after both Britain and the US signed the Treaty of the Metre, the foot was officially defined in terms of the new metric standards. The UK officially redefined the foot as being 30.48cm by the Weights and Measures Act of 1963 which became the "international foot". In the US the Metric Act of 1866 defined the foot to equal exactly 1200/3937m, or approximately 30.48006096cm. This unit, still used for geodetic surveying in the United States, is now called the survey foot. In 1959, the US National Bureau of Standards redefined the foot to equal exactly 30.48cm (about 0.999998 survey foot) to come into line with the rest of the world __ (Sitat fra [URL=ukmetrication.com]http://www.ukmetrication.com/history2.htm[/ URL] |
|
Roger
Fremo og MjF medlem Joined: 02 november 2004 Location: Norway Status: Offline Points: 1620 |
Post Options
Thanks(0)
|
Hei! Da har jeg googlet litt, slik at jeg kan svare på mitt eget spørsmål og informere de som måtte være interessert i så smale interesser.
Edited by Roger |
|
Med vennlig hilsen
RGER “Det finnes ett forbilde for alt” |
|
rosenblad
Medlem i MJF Joined: 03 november 2004 Location: Norway Status: Offline Points: 294 |
Post Options
Thanks(0)
|
Hei! HOn2 er en amerikansk/engelsk betegnelse som betyr at det er en modell i skala HO med en sporvidde på 2 fot (7mm i HO er riktig). HOf er en tysk betegnelse som betyr at det er en modell i skala HO som går på feldtbahn skinner. Dette er jo 600mm sporvidde, så min personlige mening er at HOf-betegnelsen er overflødig! MVH, Tom |
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |